HYDROGEN DE-EMBRITTLEMENT
Give us a call today to discuss your Hydrogen De-Embrittlement requirements.
HYDROGEN DE-EMBRITTLEMENT
During the cleaning and acid pickling process of electroplating, atomic hydrogen can be absorbed through the surface of the metal component. The electroplated coating traps the hydrogen inside the steel component unless they are baked soon after plating to drive the hydrogen out. If the hydrogen remains in the steel, it can migrate to areas of high stress and cause small microcracks, which rapidly enlarge under load causing a brittlement failure.
In other words, embrittlement occurs when an object is exposed to corrosive environments or hydrogen during plating processes. This exposure can affect the object at the atomic level, causing premature failure under load.
There are many standards which require hydrogen embrittlement relief baking for steel components above HRC 40 maximum hardness level or 1000Mpa tensile strength where baking at 204 deg C at 4hrs, 6hrs, 8hrs and 24hr is a requirement for hydrogen embrittlement relief.
Give us a call today to discuss your Hydrogen De Enbrittlement requirements.
Lets Talk
Contact us today to discuss all of your plating requirements and see how we can help.
Our Finishes and Services
Zinc Electroplating
Zinc Electroplating provides corrosion resistance to the steel component by acting as a barrier and a sacrificial coating.
Zinc Nickel
Zinc nickel plating offers incredibly high corrosion protection and more wear resistance in moving parts that generate intense friction.
Barrel Nickle Plating
Barrel nick plating is essential for applications where corrosion protection is mandatory.
Florentine Bronze
Florentine Bronze is a very versatile finish which can be applied to every metal to give them a ‘raw’ finish and add a protective layer of coating.
Pickle & Oil
Pickling is the treatment of metallic objects to remove dust, scale, rust, and other impurities from their surface.
Dip Spin Coatings
Dip spin coating method is applicable to most parts, there are different coatings available from clear coats, colours and torques friction coatings.
Hydrogen De-Embrittlement
During the cleaning and acid pickling process of electroplating, atomic hydrogen can be absorbed through the surface of the metal component
Metal Coating Thickness Testing
Metal coatings are an essential component for protecting the objects from corrosion and other damages.
Salt Spray Testing
Neutral Salt Spray Testing is a common method to check the corrosion resistance of objects over time.
Contact Us
If you have any questions or would like to request a quote, please do not hesitate to contact us. One of our friendly staff members will be ready to assist you with any enquiries.
Phone
(03) 9357 7350
services@allianceplaters.com.au
Address
82-84 Killara Road
Campbellfield Victoria 3061